2006 GMC Yukon Consumer Discussions

GMC Yukon Radio, Stereo, iPod, XM Sirius Questions

Re: GMC Yukon Denali Weight [msbasscat]

Written by: rsht on Oct 07, 2009 05:21 AM

A 2006 Yukon Denali weights around 6000-lbs, depending on how your particular vehicle is equipped... The best way to tell is to check the sticker on your driver side door jam. Unfortunately, even a base model Yukon (with 2-WD) weight-in at 5000+lbs, will be unsafe on your lift/elevator... Read More...

GMC Yukon Denali Weight

Written by: msbasscat on Jul 31, 2009 07:39 AM

I have a 2006 Yukon /Denali, I need to know the approx. weight of the vehicle because my parking garage can't put more the 4000 lbs. on the elavator. Read More...

GMC Yukon and Yukon Denali Problems

Re: battery keeps dying [wallycin]

Written by: 426whit on Jan 02, 2009 06:18 PM

I had a similar problem with my 2004 yukon denali xl. It died 4 times in the first 6 months of owning it. It was in and out of the dealership with all kinds of repairs, reprogramming and replacements in addition to an examination by a special GMC engineer. Even he couldn't determine the cause of the problem. I finally wrote a letter to Rick Wagoner since I was getting ... Read More...

Chrome side strip

Chrome side strip

Written by: dkatigan on Jun 12, 2008 04:19 PM

Hi I have a 2006 GMC Yukon. I was wondering if anyone knew how to take off the chrome strips on both sides of the yukon. Thanks. Read More...

I need to lower the front end on my 2006 GMC Yukon by 1 inch.

I need to lower the front end on my 2006 GMC Yukon by 1 inch.

Written by: toppdogg326 on May 25, 2008 09:17 PM

I put a set of BellTech Lowering springs on the rear of my 2006 Yukon. I want to drop the front end 1 inch to level the truck. Whats the best/easiest way to do it? Its a 2WD. The shock extenders where also put on. And yes it did drop the rear approx. 3". The kit came with new torsion keys but I really don't want to have to install them if I don't have too. The adjusting screws ... Read More...

GMC Yukon and Yukon Denali Problems

Re: Popping in steering column [ma2sk]

Written by: rsht on Apr 16, 2008 02:57 PM

I think the loud popping sound has to do with the Intermediate Shaft (or I-Shaft), it can be heard as well as felt (if I am not mistaken) in the steering wheel and/or the steering column area. Hope I am still on track to what you have experienced so far. If yes, you may verify and consider the possibility of replacing the Upper I-Shaft Assembly (Bulletin #00-02-35-003M), ... Read More...

Yukon "Reduced Engine Power message"

Update on '06 Yukon Reduced Power

Written by: bonddog on Jun 01, 2007 02:01 PM

I started this thread last August 2006. Since they replaced my Throttlebody I have not had the "Reduced Engine Power" problem. It's been 9 months now and trouble free. It turned out it was the throttlebody all along but the GMC mechanics did a lousy job of fixing it the first few times in that they didn't notice that they had crimpped some wire when they installed ... Read More...

GMC Yukon and Yukon Denali Problems

2005 Yukon XL Rear Hatch Handle

Written by: bdhplayer on Mar 25, 2007 05:28 PM

Has anyone had a rear hatch handle fail on the Yukon XL? I own a 2005 Yukon XL that was purchased in February, 2005. In August, 2006 the rear hatch handle failed for the first time. Since the vehicle had 46000 miles on it, it was not covered under warranty. At the time I paid for it. Fast forward to March 2007 and the same part failed again. Eight months later. GMC says ... Read More...

Yukon Owners: Photo Gallery

2006 Yukon XL Floormats vs. 2007 Yukon XL Floormats

Written by: juddster on Feb 01, 2007 08:06 PM

I need some new floormats for my '06 Yukon XL and have an opportunity to get some new ones from an '07 at a great price. However, can someone tell me if GMC has changed the interior so much that they are not interchangeable?? Thanks! Read More...

GMC Yukon Lease Questions

Re: Yukon Lease @299/mo w/ $3k down [tryingtolearn]

Written by: Car_man on Dec 04, 2006 04:48 AM

I would be happy to work up a sample lease payment on this truck using GMAC's actual lease program, tryingtolearn, if you provide me with its full MSRP and selling price. Both numbers are necessary to the calculation. Having both will also enable me to see how much of a discount you are being given on this truck so that I can give you my opinion of this deal. General ... Read More...